World’s Smallest Bike Wall Rack

Super simple to install, just 2 screws (there’s even a template for positioning, but we just used the bracket itself for placement). We mounted it on a stud in the tool shed so our son’s mountain bike could be stored vertically and save us some space. We put it up yesterday and so far so good.

Two things to note: the clip doesn’t bear weight (which I knew from the product description, but it doesn’t hurt to repeat), so don’t expect it to get your bike up off the floor. The rear tire will be bearing the weight of the bike. The other thing – and this I didn’t know until I tried putting the front tire of the bike on the clip – is that the whole process works best if you immobilize the front tire to the frame first so the handle bars/front part of the bike aren’t pivoting as you’re trying to put it in place. I was maneuvering in a small, enclosed space, so that may not be necessary for everyone. I used a velcro loop strap that we already had on hand.

Der Preis ist es wert.
Tolle Verarbeitung.
Verständliche Anleitung.
Funktioniert super und sieht gut aus.

Oggetto carino e simpatico che con il suo design ben di inserisce negli ambienti

Molto pratico e funzionale

Ich gebe es zu am Anfang war ich skeptisch! Aber, es funktioniert tatsächlich! Kann nur empfehlen!

UPDATED REVIEW:

In less than a year I’ve broken two of these. I replaced the first one after I broke it. I assumed it was entirely my fault. Today I was carefully taking my tire out of the CLUG when it just shattered. This product is worthless. I don’t even ride my bike that much so it’s not like the CLUG got overused. What an absolute waste of money.

OLD REVIEW BELOW (was 5 Star):

I was concerned about installing it but it installed so easily. I just followed the instructions. You will need a drill, the proper sized drill bit, a hammer (for tapping in the anchor), and screwdriver.

I have 32mm tires and that is the largest tire allowed for the smallest CLUG. I was concerned that it would be hard to get the bike in and out of the CLUG but it’s not bad. I do have to kind of slam the wheel into the CLUG but not a very hard slam; I just need a bit of velocity to get the tire into the CLUG. It holds very firm.

So it’s been almost a year since I bought it. I was so scared to put it up in my new home and really frustrasted of all the hanging curtains, pictures, and shelves I had already done. I put it on my wall last weekend and it was extremely easy to do. Please make sure to use a stud finder and use the screw anchors that come with it!! You must make the holes bigger for both the screws and anchors. I was waiting to hear a crash made by my bike, but it hasn’t fallen. I have no garage so I have to store in my laundry room. Really good product and I would recommend it.

Ich gebe es zu am Anfang war ich skeptisch! Aber, es funktioniert tatsächlich! Kann nur empfehlen!

Tolles Design, tolles Produkt, einfache Montage! Ich würde es jedem empfehlen, der eine simple und unscheinbare Halterung sucht! Klares Must!

El producto cumple con su función perfectamente. La rueda de mi bici es de 25 y se adapta perfectamente.
Echo en falta que venga alguna pequeña pieza para que la rueda trasera no toque la pared y no la manche. Yo he tenido que poner un cartón que no es muy estético.

I just put this up so I cannot comment on the tire deflation aspect other than if it does I plan to attach a Velcro strap, BUT I can say this was my best option for functional and visible storage for my bike in my new apartment. I purchased the smallest MTB sized Clug (43-62mm) as my bike has tires that were 2.2 which was the max but still within the size range I thought. This thing is S.N.U.G on my tire, It makes a really squeaky noise and looks like I’m going to break the plastic each time I have put it in. I am considering going tubeless in the future, and if I do, I will probably purchase the larger size to at least see if the attach/release aspect is smoother. I put a little bit of water on the “gripper” aspect the last few times I put the bike in the rack, and it seemed to go easier? If I had to purchase again, I would go the next size up. I use my bike often for single track and some city transportation, so I would not be surprised if I break it over time simply because it is THAT snug on my tires and I am frequently removing and re-attaching my bike. I did customize my Clug with some matte black spray paint on the “clipper” part prior to installation, and I think it blends into my tire nicely, or you could paint it an accent color. since the tire never touches the “clipper” part, I have no worries that it might come off on my tire or chip away as long as I am using the bike rack correctly. I understand where this bike rack might not be best for everyone, BUT for my situation it is WONDERFUL. I would be careful if mounting in drywall alone, as the paper instructions explicitly stated that it should only be used on studs or in brick/concrete so I am not sure if that is just for the MTB versions or all of them. You really do have to pull forcefully to get your bike out, and I would worry about ripping it clean out if mounted on drywall alone, at least in my situation. I took off one star because its REALLLLLLY snug, and I wish that sizing guide had been clearer for those of us with 2.2 tires.

I bought these originally to hold up my kids bikes, but I ordered the wrong size. BUT they have worked perfectly for other things, such as my sons light saber!

Ich gebe es zu am Anfang war ich skeptisch! Aber, es funktioniert tatsächlich! Kann nur empfehlen!

These bike holders are cool in concept but the product itself is cheap junk and will most certainly break very quickly with moderate/consistent use.

I think if you can find the sweet spot of your specific tire size married up with one of these products it has the potential to work for a while – but it’ll break, I guarantee it. I tried picking these up for my older sons to use in our garage – they ride mountain bikes without kick stands so some sort of bike storage system was desperately needed that was easy to use for them. Both of their bikes have “Plus tires” which are stated at 2.6” wide. I tried the MTB XL as well as the MTB standard CLUGS hoping one would work. The XL was way too big and the bikes wouldn’t stand up and the standard size was way too small – so much so that when I was able to force the wheel inside the CLUG, every other time the inner plastic piece would separate from the outer plastic piece. It was about 5 more repetitions from cracking and breaking for good. The plastic seems super brittle and while it seems thin enough to flex a bit, there’s no way these things are lasting more than a week especially with kids putting their bikes in and out.

Bottom line is these may work temporarily for some users but if you plan to use them daily (meaning, bikes in and out constantly) don’t bet on them lasting very long.

Product work well. However, it really needs to be mounted in a stud or wood. I used the plastic flanges for installing the rack in drywall and it was not secure. After a few uses it started to pull away from the wall. The road bike size worked fine but mountain bikes pulled out easily.

Tolles Design, tolles Produkt, einfache Montage! Ich würde es jedem empfehlen, der eine simple und unscheinbare Halterung sucht! Klares Must!

I purchased the size specified for my road bike. with 1-1/4″ tires. It installed easily. I used the vertical configuration with my rear tire on the floor against the wall and the front tire in the mount, exactly as recommended. I used the included anchors and measured everything using the box diagram.

The first time I used it it worked fine. Held the bike in and everything was good. The second time I used it the same way; slipped the bike into the bracket as before. I left the house and came home to find my bike laying on the floor. The orange part of the bracket was broken. I now have to straighten my read derailleur because it is bent. This mount is clearly not sturdy enough. I should have known since it’s just a piece of plastic.

I do not recommend this product.

I wanted to like it for the simple, unobtrusive design, but it’s just not good. I’ll probably end up spending more to fix the derailleur than I did on this bracket.

Look elsewhere.

Probably not the intended application but works just fine. I’ve had it up for a couple months now, no issues. I didn’t really like the price but, given that its the only option I could find, I suppose it’s worth it. There was enough room under the clip to mount the charger (Velcro tape) which makes for a nice clean storage and charging station.

The mount doesn’t seem like much but its proven itself to be quite durable: I use the scooter several times a week so it gets plenty of use. Mounting was easy and straightforward. The wheel fits snug but not too tight.

Very happy, just wish it was 10 bucks less…

I just put this up so I cannot comment on the tire deflation aspect other than if it does I plan to attach a Velcro strap, BUT I can say this was my best option for functional and visible storage for my bike in my new apartment. I purchased the smallest MTB sized Clug (43-62mm) as my bike has tires that were 2.2 which was the max but still within the size range I thought. This thing is S.N.U.G on my tire, It makes a really squeaky noise and looks like I’m going to break the plastic each time I have put it in. I am considering going tubeless in the future, and if I do, I will probably purchase the larger size to at least see if the attach/release aspect is smoother. I put a little bit of water on the “gripper” aspect the last few times I put the bike in the rack, and it seemed to go easier? If I had to purchase again, I would go the next size up. I use my bike often for single track and some city transportation, so I would not be surprised if I break it over time simply because it is THAT snug on my tires and I am frequently removing and re-attaching my bike. I did customize my Clug with some matte black spray paint on the “clipper” part prior to installation, and I think it blends into my tire nicely, or you could paint it an accent color. since the tire never touches the “clipper” part, I have no worries that it might come off on my tire or chip away as long as I am using the bike rack correctly. I understand where this bike rack might not be best for everyone, BUT for my situation it is WONDERFUL. I would be careful if mounting in drywall alone, as the paper instructions explicitly stated that it should only be used on studs or in brick/concrete so I am not sure if that is just for the MTB versions or all of them. You really do have to pull forcefully to get your bike out, and I would worry about ripping it clean out if mounted on drywall alone, at least in my situation. I took off one star because its REALLLLLLY snug, and I wish that sizing guide had been clearer for those of us with 2.2 tires.